NON-COMBUSTIBLE HEAT-INSULATING MATERIALS

PURPOSE:

The materials are liquid compositions based on water or alcohol, which contain polymer film formers, polymer, glass, ceramic or other microspheres, low-density fillers (wood flour or rice husk), flame retardants and other processing aids. They are applied to the surface to be protected using a spray gun, roller or brush.

TECHNICAL SPECIFICATIONS:

The thickness of one coating layer does not exceed 0.4 mm, the drying time of one coating layer is 2-4 hours at room temperature and 24 hours when every 2 mm of the coating layer is applied. The maximum thickness is 10-12 mm, the density of the finished coating: 0.35-0.55 g / cm3; tensile strength: 0.7-2.0 MPa; elongation of 5-15%; thermal conductivity coefficient: not more than 0.1 W / (m- ° С) specific heat: not less than 1.6 kJ / kg- ° С; reduction of heat loss with a coating thickness of 1 mm: up to 250%; adhesion to metal and concrete: 1 point; longevity: 10-20 years.

RECOMMENDED FIELD OF APPLICATION:

Development can be used in housing and civil and industrial construction, at heat supply enterprises.

RESULTS OF THE RESEARCH:

Provides consistent results.

STAGE OF THE DEVELOPMENT READINESS:

Tested in trial operation.

TRANSFER OPPORTUNITY:

Joint bringing to the industrial level.

NOVELTY:

3 patents of Ukraine.

 

IF YOU ARE INTERESTED IN THIS DEVELOPMENT, PLEASE,

WRITE TO US

Leave a Reply

Your email address will not be published. Required fields are marked *